How to make Psi Wheel:

Psi wheel measures to be taken:

• Aerokinetic – Make sure you are at a approximate distance of four to five feet from the psi wheel. Make sure all windows and doors are shut and no fans, heaters or air conditioners are on. Keep your breath shallow and make absolutely sure there are no wind currents in the room. Hold as still as possible as to not create your own wind currents. If you are still able to move the pw you may be indeed Aerokinetic.
• Electrokinetic & Telekinetic – Do to the thermal reaction of the hands surrounding the psi wheel certain measures must be taken. First, try to work in a warm room not cold for if the temperature in your hands is much greater then in the room this will automatically send the pw into rotation once you cup your hands around it. Secondly, do not wet your hands for this can interfere with your electrical charges in which you are using to influence the pw in both Telekinesis and Electrokinesis. Thirdly, find a plastic cover such as a piece of Tupperware and place it over the pw. Make sure the pw has plenty of room to move top and sides. If you can not move it still try to change the plastic for a common household clear drinking glass. Even in these conditions, if you are not a kinetic that requires being within one foot of the object you are attempting to influence, you do not necessarily have to cup your hands around the pw, in fact it is best if you do not. Stand away from the pw at approximately three feet and attempt to spin the pw by influencing the direction of your mind and body frequency emittions. If you can move the pw after all of this you may very well be an Electrokinetic or a Telekinetic.